• Call us: 403-217-2346
  • Toll Free: 888-918-2346
  • Store Address & Hours:
    3830 7th Street SE Calgary, Alberta
    Tues&Wed 11am to 5pm | Thurs Noon to 6pm | Fri Noon to 6pm | Sat Noon to 4pm
    Always closed on Long weekends

Molds-Cutters & Stamps

Having the right molds when formulating is very helpful.  Check out our list of molds cutters and soap stamps to enhance your experience!

Products
Items: 19 of 16, per page
  • Drag and drop me to the cart The product is unavailable in the catalog

    Easy to remove with no greasing necessary.  Can be filled to top with easy removal of soap. Suitable for CP, HP, OPCP and melt and pour soap.  Use a tray under to alow for easy moving around.  

    6 cavities

    3" wide by 1 3/4" thick

    • $12

    Not rated yet
  • Drag and drop me to the cart The product is unavailable in the catalog

    Easy to remove with no greasing necessary.  Can be filled to top with easy removal of soap. Suitable for CP, HP, OPCP and melt and pour soap.  Use a tray under to allow for easy moving around.  

    6 cavities

    2 3/4" wide by 1 1/4" thick

    • $15

    Not rated yet
  • Drag and drop me to the cart The product is unavailable in the catalog

     We recommend using sodium lactate to harden the soap comes right out of the silicone molds.no sticking to the side or wrinkles that appear at times in silicone liners. Your soap may need an extra couple of days to fully harden since the flexible silicone sides do not allow air inside the mold. This allows slower evaporation of water and hardening of soap  Try it with melt & Pour.

    To unmold our soap gently break the airlock around the edges of your mold and allow air down the sides. 

    Makes ten one inch bars of soap

    Fits 2 pounds of CP HP soap batter for some height. 

     Care of your mold: We recommend hand washing your mold.

    Cavities: 1
    Cavity Dimensions: 10" long x 3.5" wide  x 2.1/4" tall
    Cavity Capacity Holds 32 oz to the brim, 
    Mold Material: Silicone

     

    • $32

    Not rated yet
  • Choose the product options first The product is unavailable in the catalog

    The only bath bomb mold you will ever need!  

    2 piece mold 2.5  inch sphere  

    • $6.50

    Not rated yet
  • Drag and drop me to the cart The product is unavailable in the catalog

    2 piece mold 3" by 1.5" tall  

    Material:  Stainless steel.

    How to use:  Use a clean dry surface to place your mold.  (if you need to move the bombs right away use a tray)  Fill the cavity with your bath bomb mixture to the brim.  Use the press handle to push down as well as your fingers to push the mixture down as much as possible.   Prior to releasing the bath bomb use the flat surface to smooth out the bottom by pushing it back and forth. Hold the outside of the mold while pushing the handle down until the bath bomb is released.  

    These molds are a stainless steel strong and durable that can handle all of your bath bomb making needs. Tip - wipe away any mix stuck to the inside of your cylinder before moving on to your next bath bomb  
    • $10

    Not rated yet
  • Product is out of stock The product is unavailable in the catalog

    2 piece mold 3" by 1.5" tall 

    Material:  Stainless steel 

    How to use:  Use a clean dry surface to place your mold.  (if you need to move the bombs right away use a tray)  Fill the cavity with your bath bomb mixture to the brim.  Use the press handle to push down as well as your fingers to push the mixture down as much as possible.   Prior to releasing the bath bomb use the flat surface to smooth out the bottom by pushing it back and forth. Hold the outside of the mold while pushing the handle down until the bath bomb is released.  

    Can also be used for molding shampoo bars

    These molds are a stainless steel strong and durable that can handle all of your bath bomb making needs. Tip - wipe away any mix stuck to the inside of your cylinder before moving on to your next bath bomb 
     
    • $10

    Not rated yet
  • Product is out of stock The product is unavailable in the catalog

    2 piece mold 2.7" by 1.5" tall  

    Material:  Stainless steel.

    How to use:  Use a clean dry surface to place your mold.  (if you need to move the bombs right away use a tray)  Fill the cavity with your bath bomb mixture to the brim.  Use the press handle to push down as well as your fingers to push the mixture down as much as possible.   Prior to releasing the bath bomb use the flat surface to smooth out the bottom by pushing it back and forth. Hold the outside of the mold while pushing the handle down until the bath bomb is released.  

    These molds are a stainless steel strong and durable that can handle all of your bath bomb making needs. Tip - wipe away any mix stuck to the inside of your cylinder before moving on to your next bath bomb  
    • $10

    Not rated yet
  • Drag and drop me to the cart The product is unavailable in the catalog

    Our manager came up with the idea of doing a gift box bath bomb.  Use our mica with some alcohol to paint on the bow!

    2 piece mold 3.2" by 1.5" tall 

    Material:  Stainless steel 

    How to use:  Use a clean dry surface to place your mold.  (if you need to move the bombs right away use a tray)  Fill the cavity with your bath bomb mixture to the brim.  Use the press handle to push down as well as your fingers to push the mixture down as much as possible.   Prior to releasing the bath bomb use the flat surface to smooth out the bottom by pushing it back and forth. Hold the outside of the mold while pushing the handle down until the bath bomb is released.  

    Can also be used for molding shampoo bars

    These molds are a stainless steel strong and durable that can handle all of your bath bomb making needs. Tip - wipe away any mix stuck to the inside of your cylinder before moving on to your next bath bomb 
     
    • $10

    Not rated yet
  • Product is out of stock The product is unavailable in the catalog

    2 piece mold 3" by 1.5" tall 

    Material:  Stainless steel 

    How to use:  Use a clean dry surface to place your mold.  (if you need to move the bombs right away use a tray)  Fill the cavity with your bath bomb mixture to the brim.  Use the press handle to push down as well as your fingers to push the mixture down as much as possible.   Prior to releasing the bath bomb use the flat surface to smooth out the bottom by pushing it back and forth. Hold the outside of the mold while pushing the handle down until the bath bomb is released.  

    Can also be used for molding shampoo bars

    These molds are a stainless steel strong and durable that can handle all of your bath bomb making needs. Tip - wipe away any mix stuck to the inside of your cylinder before moving on to your next bath bomb 
     
    • $10

    Not rated yet
Products
Items: 19 of 16, per page
Bestsellers
  • Drag and drop me to the cart The product is unavailable in the catalog

    Not rated yet
    • $32
  • Choose the product options first The product is unavailable in the catalog

    Not rated yet
    • $6.50
  • Drag and drop me to the cart The product is unavailable in the catalog

    Not rated yet
    • $15
  • Drag and drop me to the cart The product is unavailable in the catalog

    Not rated yet
    • $12
  • Product is out of stock The product is unavailable in the catalog

    Not rated yet
    • $10
  • Product is out of stock The product is unavailable in the catalog

    Not rated yet
    • $10